At present, there are mainly two commercial SLS processes: one is the Rapid Tool process of the American DTM company; the other is the Direct Tool process of the German EOS company [1]. Sometimes, multiple electrodes need to be replaced for processing a cavity, which seriously Ultra high power Graphite Electrode the processing efficiency of EDM. It should be noted that the thermal conductivity of epoxy resin is poor. Although the poor thermal conductivity brings the benefit of using a lower injection pressure, the production cycle must be considered too long. Rapid mold manufacturing based on rapid prototyping technology is a brand new technology that combines RP technology with traditional mold manufacturing technology.
Abstract Rapid prototyping, as a mature advanced manufacturing technology, has successfully realized rapid prototyping and is developing rapidly in the direction of rapid manufacturing. Keywords: rapid prototyping Introduction to rapid mold making Mold production parts have a series of advantages such as high production efficiency, good quality, energy saving and raw materials, and low cost. It can also process materials after heat treatment, thereby avoiding thermal deformation caused by heat treatment after processing.
Then a new layer of powder is spread on the powder spreading device, and the next layer of sintering is carried out, and it is repeated until the final part is obtained. This paper introduces the application of rapid prototyping technology in the direction of rapid mold making, and puts forward some problems that need to be solved.
This low-density (approximately 50%) molded part is also subjected to binder removal and copper infiltration treatment, and finally a module with a density of more than 92% is obtained. After rapid prototyping technology is introduced into the mold manufacturing process, mold development and manufacturing is rapid mold manufacturing.At the same time, the successful application of rapid prototyping technology in the field of rapid mold manufacturing will undoubtedly inject new development into rapid prototyping technology. Using this method to directly make the cavity or core of the injection mold also achieves very good results.
https://www.china-graphiteelectrode.com/product/graphite-electrode/ultra-graphite-electrode.html
Abstract Rapid prototyping, as a mature advanced manufacturing technology, has successfully realized rapid prototyping and is developing rapidly in the direction of rapid manufacturing. Keywords: rapid prototyping Introduction to rapid mold making Mold production parts have a series of advantages such as high production efficiency, good quality, energy saving and raw materials, and low cost. It can also process materials after heat treatment, thereby avoiding thermal deformation caused by heat treatment after processing.
Then a new layer of powder is spread on the powder spreading device, and the next layer of sintering is carried out, and it is repeated until the final part is obtained. This paper introduces the application of rapid prototyping technology in the direction of rapid mold making, and puts forward some problems that need to be solved.
This low-density (approximately 50%) molded part is also subjected to binder removal and copper infiltration treatment, and finally a module with a density of more than 92% is obtained. After rapid prototyping technology is introduced into the mold manufacturing process, mold development and manufacturing is rapid mold manufacturing.At the same time, the successful application of rapid prototyping technology in the field of rapid mold manufacturing will undoubtedly inject new development into rapid prototyping technology. Using this method to directly make the cavity or core of the injection mold also achieves very good results.
https://www.china-graphiteelectrode.com/product/graphite-electrode/ultra-graphite-electrode.html
コメント